When it comes to plumbing problems, there are a few basic tools that every homeowner should have at hand such as augers, snakes, and plungers. In this article, we will specifically look at toilet auger vs snake to understand which is more efficient.
Augers and snakes are tools designed to help you unclog your toilets and drains. Unfortunately, most people don’t know which one to use when faced with a clogged toilet or drain.
So, we’ll compare and contrast the two tools to help you can make an informed decision on what will work best for you.
Toilet auger vs snake, which is the best to use?
If you’re faced with a clogged drain, do you know which tool to use – the toilet auger or the snake?
In order to determine which the best is, we need to first look at each tool individually to understand what it is and how it works. Let’s start with the toilet auger.
Toilet Auger
What is a toilet auger?
A toilet auger is a device that is used to clear clogs from toilets.
It consists of a coil of metal or plastic tubing with a long, flexible cable that is attached to a handle.
To unclog a toilet, it is inserted into the toilet bowl or through the hole in the bottom of the bowl. The auger coil is then turned which breaks up the clog and allows it to be flushed away.
Toilet augers are relatively inexpensive and can be found at most hardware stores.
What is a toilet auger used for?
Chances are, if you don’t own an auger, you don’t really know what it is used for.
In simple terms, it is used to clear clogs in your toilet without having to disturb them and cause a mess.
Also, it can be inserted into a plumbing pipe to remove debris or blockages and can be used for both residential and commercial plumbing systems.
When should I use a toilet auger?
If you’re having trouble with your plumbing, it might be time to invest in a toilet auger.
A drain auger is a handy tool that can help you clear clogs in your toilets without having to call a plumber.
So if your toilet is backed up and you’re thinking about reaching for the plunger, consider using an auger instead.
How effective is a toilet auger?
If your toilet is clogged and a plunger isn’t doing the trick, you may want to try using a toilet auger.
Toilet augers are effective against clogged toilets and can often clear them without too much trouble.
However, before you try using one, make sure you know how to use it properly so you don’t damage your pipes.
Related article: Can you leave Drano overnight?
How much does a toilet auger cost?
Toilet augers can range in price from around $30 to over $100, depending on the features and quality you’re looking for.
So, whether you’re a budget-minded shopper or want the best of the best, there’s an option out there for you.
How long of a toilet auger do I need?
If you’re wondering how long of a toilet auger you need, the answer depends on the size of your toilet.
A standard toilet is usually between 1 and 2 inches in diameter, so you’ll want an auger that’s at least 3 feet long.
However, if your toilet is larger than average, you may need an auger that’s up to 4 or 5 feet long.
It also comes down to preferences. Some people may prefer a 6-foot toilet auger while for others a 3-foot toilet auger is long enough.
Whatever size auger you choose, make sure it has a flexible head so it can maneuver around bends in the piping.
See also: Best toilet drain auger
Drain snakeÂ
What is a drain snake?
Around the house, there are all sorts of little things that can go wrong and clog up your drains.
Hair, soap scum, and grease can all cause problems. Even small pieces of food can end up causing a big backup.
That’s where a drain snake comes in handy.
A drain snake is simply a flexible rod that is inserted into a drainage pipe in order to clear out any obstructions.
It can be used on both residential and commercial properties, and it’s especially useful in situations where clogs are frequent.
So, is a drain snake an auger?
Some people use the term “auger” to describe a drain snake. But a drain snake is not a toilet auger; they’re two totally different tools.
Both tools can help clear out a clog, but a drain snake is specifically designed to be used on drains while an auger is designed for toilets.
Can I use a drain snake on a toilet?
If you’re like most people, the first time you heard the term “drain snake” was when you were trying to figure out what to do about a clogged toilet.
But believe it or not, a drain snake is not meant for unclogging toilets rather for sink and bathroom drains; something that a toilet auger simply cannot do.
See also: How to get a drain snake to turn a corner
How to use a drain snake
Snaking a drain is an easy way to clear a clog and get your water flowing again. Here’s how to do it:
- Insert the snake into the drain opening.
- Turn the handle as you push the snake down the drain.
- When you reach the clog, rotate the handle in a clockwise motion to drill through the obstruction.
- Pull out of the drain and dispose of whatever you pulled out.
- Rinse off the snake with water when you’re done snaking it.
See also: Reasons why your toilet auger won’t go in
Can I snake my own drain?
Yes, you can snake your own drain.
If you are the handy type who’s always fixing things around the house, snaking your own drain can be a great way to save money. But, it’s not without its risks.
Unless you know what you’re doing, attempting to snake your own drain is likely to do more harm than good.
So if you are not sure, consider calling a professional plumber first to guide you through the process or snake the drain for you.
What can I use instead of a drain snake?
If your sink is clogged and you don’t have the money to buy a drain snake or call a plumber, you can use a wire hanger.
If you’re thinking, “Why would I use a wire hanger to unclog a drain when I could just use a plunger?”
A plunger is generally the go-to tool for this job. But what if the clog is deep into the drain? A wire hanger would be ideal to get the clog out.
It may not be as effective as a snake, but it’ll get the job done in a pinch.
See also: Best toilet brush and plunger combo
So, what is the difference between an auger and a snake?
Drain snakes and augers are two of the most common tools used to clear clogged drains or toilets. But what’s the difference between them?
A drain snake is a long, coiled wire that can be inserted into a drain to remove clogs.
An auger is a shorter, thicker cable with a drill head on one end and a handle on the other. It can be used to break up clogs or clear debris from curved pipes.
So which one should you use? That depends on the severity of the clog and the size of the pipe and whether you are clearing a drain or a toilet. If you’re not sure which tool to use, call a plumber for help.
See also: How to Remove Object From Toilet Trap
Conclusion
Toilet auger vs snake; which is more efficient?
Well, if you’re like me, then you probably don’t think about your plumbing until something goes wrong. And when something does go wrong—like a clogged toilet—you may not know what tools to use to fix it.
In this article, we have talked about toilet auger vs drain snake and how they compare and contrast.
Toilet augers and snakes are designed to clear your plumbing from clogs and blockages. But, it is important to choose the right one for the right job. Use a drain snake for unclogging drains and a toilet auger for toilets.
